BBGYJ - SERMETEL 249

Product Identification

Product ID:SERMETEL 249
MSDS Date:01/01/1985
FSC:8010
NIIN:00-111-6384
MSDS Number: BBGYJ

Responsible Party
SERMATECH INTERNATIONAL INC.

Emergency Phone: 215 948-5100

Cage: 78710

Contractor
SERMATECH INTERNATIONAL INC
LIMERICK, PA 19468

Telephone: (215) 948-5100

Cage: 78710

Ingredients

ALKALI SILICATE SOLUTION


ZINC (SARA III)

CAS: 7440-66-6

RTECS: ZG8600000

Fraction By Weight: 29%

OSHA PEL 10 MG ZNO/M3

ACGIH TLV: 10 MG ZNO/M3; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 29%

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST; 9192

Hazards

Effects of Overexposure:PROLONGED SKIN CONTACT WITH THE COATING LIQUID
MAY PRODUCE ALKALI BURNS.

First Aid

First Aid:CONTACT: DRENCH SKIN WITH WATER. SEVERE SKIN CONTACT MAY
REQUIRE MEDICAL ATTENTION. INGESTION: GIVE LARGE AMOUNTS OF WATER,
OBTAIN MEDICAL ATTENTION. INHALATION: OBTAIN MEDICAL ATTENTION.

Fire Fighting

Flash Point:1700F
Extinguishing Media:CARBON DIOXIDE, SAND
Fire Fighting Procedures:DO NOT USE WATER BASED EXTINGUISHING AGENTS
Unusual Fire/Explosion Hazard:DIRECT CONTACT WITH ALKALIS OR ACIDS MAY
PRODUCE HYDROGEN GAS.

Accidental Release

Spill Release Procedures:FLUSH SPILLAGE WITH EXCESS WATER.

Handling

Handling and Storage Precautions:STORE INSIDE BETWEEN 40-90F
Other Precautions:USE OLDEST STOCK FIRST.

Exposure Controls

Ventilation:LOCAL EXHAUST
Protective Gloves:YES
Other Protective Equipment:HIGHLY EFFICIENT LOCAL EXHAUST SPRAY BOOTHS
REQUIRED.
Supplemental Safety and Health
SERMATECH INTERNATIONAL INC. 155 S. LIMERICK ROAD, LIMERICK, PA. 19468

Chemical Properties

Boiling Pt:B.P. Text:220F
Vapor Pres:23.
Vapor Density:0.70
Spec Gravity:1.8
Evaporation Rate & Reference:1
Appearance and Odor:DARK METALLIC GRAY COLOR-NO ODOR
Percent Volatiles by Volume:71.5

Stability

Stability Indicator/Materials to Avoid:YES
ACIDS, ALKALIS, OXIDIZING AGENTS.
Stability Condition to Avoid:DO NOT FREEZE. STORE BETWEEN 40-90F.
Hazardous Decomposition Products:MAY PRODUCE HYDROGEN GAS IN CONTACT
WITH ACIDS OR ALKALIS.

Disposal

Waste Disposal Methods:REMOVE PIGMENT BY FILTRATION, DISCARD AS SOLID
WASTE. LIQUID PORTION WILL REQUIRE PH ADJUSTMENT WITH ACID TO A PH
OF 7.-85.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.